Developed by BraunAbility’s partly owned subsidiary Autoadapt for the European market the lift takes everyone into consideration. For the vehicle owner it is the ability to maximise the number of seats inside the vehicle. The slim pump module in cooperation with the low weight makes it possible to fit an extra seat in both terms of volume and weight.
“This project started with a massive research phase where we looked at the industry’s current situation in order to find out what could be improved. The result? Well, I wouldn’t say we’ve invented the wheel, it still does the same job, but we might have removed a few spokes and made it rounder.” says Roger Appelqvist, Autoadapt’s Technical Manager for the project.
The installer will see the benefits of using mounting brackets that utilise the existing hole pattern of the vehicle. The entire cassette is fitted into place without the need to drill any holes at all. However wiring and fluids will in some cases require holes to be drilled. The driver will notice the ease of use and reliability. As well as improved road handling on the vehicle compared to heavier lifts. For the end user, special consideration has been made to make the lift sturdy and smooth in operation, something you can rely on every single day.
BraunAbility Cassette Lift Technical specifications
Length: 1220 mm
Width: 1050 mm
Height: 140 mm
Weight: 130 kg
Vertical travel: 1075 mm
Moving from upper edge of cassette and up: 430 mm
Minimum move up: 130 mm
Moving from upper edge of cassette and down: 645 mm
Usable length: 1265-1420 mm
Usable width: 800 mm
Tested and approved
Salt spray test – 50 hours, according to ASTM B117-11
Climate test - Multiple full cycle tests in -15°C and +60°C
Cycle test - 32,000 cycles at maximum load (350 kg).
EMC test - According to ECE R-10
The BraunAbility Cassette Lift complies with the EN1756 standard.