Turny Car seat lift Car adaptation product.

TURNY CAR SEAT LIFT > Accessories

Remote control Carony roller section The Carony system offers roller section in three lengths of 475, 550 and 600 mm. Height-raising kit A car seat accessory in the Turny system. On some vehicles the height of the original seat is so great that it after installing Turny, it is necessary to raise the seat a bit so that it can be reached. The height-raising kit is installed between the car seat and Turny. The kits for the BEV and Recaro seats in the Turny system raise seat height by 35 mm and 70 mm, respectively.	Folding foot support Protective bag for the sensor mat In certain vehicles, a mat with contacts is located beneath the seat cushion upholstery and detects whether the seat is occupied. This mat must be activated in order to retain airbag system functions after Turny is installed. The mat is therefore removed from the original seat, rolled up and placed in a protective bag .The mat connector is then re-connected to the car’s airbag system.	Car seat rails Double-locked car seat rails to allow better adjustment of the seatback rake. Protective bag for the belt cartridge In most cases, the belt cartridge is located together with the original belt catch, whose use is recommended. If this is not possible, the belt cartridge is replaced by a resistor possibly with the inclusion of a capacity. The protective bag gives a tidier appearance and protects against external damage.


Back	Find a dealer Click here to find a dealer close to you