A power wheelchair that finally enables
you to travel in a
standard small car!
CARONY GO will take you from your
home right
into your car.
CARONY GO is a class B wheelchair with a user weight limit
of 120 kg. The chair is CE-labelled and approved to Swedish Handicap Institute requirements for power wheelchairs.
A Turnout swivel base needs to be installed in the
car, onto which the power wheelchair seat slides
from its wheel unit. CARONY GO can also be combined
with a Turny car seat lift
for use in MPVs with
higher floors.
The wheelchair is easy and practical both in the
home and outside on uneven surfaces.
The wheelchair’s wheel unit weighs 75 kg and can
be lifted
into the vehicle’s boot using a wheelchair
boot hoist, for
example Carolift 90.
The Carolift 90, is
fully powered and
operated by a
hand control (see photo series below right).
View our online films! You need Windows Media Player
installed on your computer. If the the film is not running
smoothly, right-click and "Save as" to view at your convenience.
See the entire Carony GO film (33 MB)
Select scenes from the Carony GO film
Carony GO PDF brochure
Read more about the Carony system
The Carony GO accessories
You can set your wheelchair speed to fast or slow using the ‘hare’ and ‘tortoise’ buttons.
This enables precision
in confined areas, and higher speed
(max. 6 km/h).
1. Start by turning the swivel base outwards
using the handcontrol.
Adjust the heigth of the wheel unit of Carony GO to the
height of Turnout swivel base.
2. Dock the Carony wheel unit to the Turnout swivel base.
3. Push the seat across to the seat frame.
4. Loosen the Carony wheel unit ...
5. ..and turn the seat with the hand control into its correct position in the car.
6. Store the wheel unit in the boot using the hoist Carolift 90.
You are ready to go!
Back